Page 110 Dedicated Micros
WEBUSER.ini
The WEBUSER.ini file contains the username and passwords for accessing the web
configuration pages on the Digital Sprite 2.
It also contains the username and password for the Viewer software and the ability to identify
which mode of operation can be accessed by a user (live or replay) and which cameras the user
can access.
The first example shows the default username and password for accessing the web
configuration pages on the Digital Sprite 2.
##################################################################
# #
# DS2 Webuser.ini Version 18th May 2004 #
# #
##################################################################
# ——————————————————————————————————
# Note: This file requires a blank line at the end of this file.
# Note: Line with #— are comments. i.e. #— Username(s) Password(s)
# ——————————————————————————————————
[WebPage Configuration]
# — Username(s) Password(s) —
dm=web
This example shows the command string for enabling John Smith to have access to cameras 1
to 16 in live mode, cameras 1 to 8 in replay and the username and password for this Operator
when logging in using the Viewer software.
###################################################################
# #
# Provides access for cameras 1 to 16 in live and cameras 1 to 8 in playback #
# for John Smith #
# #
##################################################################
# object=cgi
live_cams=1-16
replay_cams=1-8
#— Username(s) Password(s) —
john=smith
To Next Page
Loading...
