DediProg SF600 - User Manual

SF600/SF600 Plus Serial Flash Programming solution
www.dediprog.com 1
SF600/SF600Plus
Serial Flash Programming solutions
The Innovative solution to update the Serial Flash on board and Offline
 High performances
 USB High speed support
 In Circuit Programming (program on board SPI Flash)
 Socket Programming (program SPI flash in the socket)
 Start Button function
 Standalone mode (SF600Plus): Update the Serial flash without computer
 Support single, Dual and Quad IO
 Three software optimized interfaces:
- Engineering Interface for expert
- Command Line for automatic control
- Production interface for operator
 Multi-Programmers support through USB
 Friendly and powerful tool with free life time update via Website
 Portable programmer
 Advanced I/O control

Summary

Products Comparison

SF600 and SF600 Plus Description

Interface Description

Programming Methods

In Circuit Programming

Describes programming directly on the board using the ICP header, highlighting performance.

Backup Boot Flash Method

Socket Programming

Covers programming Serial Flash chips manually removed and placed into adaptors.

SF600 and SF600 Plus Software

USB Mode

Describes controlling the programmer via a user-friendly interface for various operations.

Engineering User Interface

Command Line Interface

Production User Interface

Standalone Mode (SF600 Plus)

Describes operating the SF600Plus without a computer connection, optimized for production.

Specification

DC and IO Characteristics

Covers electrical characteristics, including voltage levels, signal management, and timing.

ICP DC and AC Characteristics

Provides detailed DC and AC specifications for SPI signals, including voltage levels and current.

ICP Timing Details

Programming Performance

DediProg SF600 Specifications

General

Category	Programmer
Interface	USB 2.0
Supported Devices	SPI Flash
Voltage	1.8V, 3.3V
Supported Flash Sizes	Up to 128Mbit
Operating System Support	Windows XP, Vista, 7, 8, 10