DediProg SF600 - Table of Contents

SF600/SF600 Plus Serial Flash Programming solution
www.dediprog.com 2
I. Products comparison ................................................................. 3
II. SF600 and SF600Plus description ............................................... 4
2.1 Interface description ............................................................................. 4
2.2 ICP Header description .......................................................................... 6
2.3 Application Header ................................................................................ 8
2.3.1 Backward compatibility with SF100 ................................................................... 8
2.3.2 Application Universal Header ............................................................................. 8
2.3.3 Pin Header pitch ................................................................................................. 8
III. Programming methods .............................................................. 9
3.1 In Circuit Programming .......................................................................... 9
3.2 SPI bus in High Impedance .................................................................... 9
3.3 SPI bus isolation circuit .......................................................................... 9
3.4 Backup Boot Flash method .................................................................. 10
3.5 Socket Programming ........................................................................... 11
IV. SF600 and SF600Plus software ................................................. 13
4.1 USB mode ............................................................................................ 13
4.1.1 Engineering User Interface ............................................................................... 13
4.1.2 Command line Interface ................................................................................... 14
4.1.3 Production User interface ................................................................................ 15
4.2 Standalone mode (SF600Plus) ............................................................. 16
4.2.1 Project Preparation ........................................................................................... 16
4.2.2 Standalone programming ................................................................................. 16
V. Specification............................................................................ 17
5.1 USB Connector ..................................................................................... 17
5.2 DC and IO characteristics ..................................................................... 17
5.2.1 Socket DC Characteristics ................................................................................. 17
5.2.2 ICP DC and AC characteristics ........................................................................... 17
5.2.3 ICP timing .......................................................................................................... 20
5.2.4 Host PC requirements ....................................................................................... 21
VI. Programming Performance ...................................................... 22
VII.Revision History ...................................................................... 23
Important notice:
This document is provided as a guide line and must not be disclosed without consent of
DediProg. However, no responsibility is assumed for errors that might appear.
DediProg reserves the right to make any changes to the product and/or the specification at
any time without notice. No part of this document may be copied or reproduced in any
form or by any means without prior written consent of DediProg.