22
4. Maintenance
4.3 Main Brush and Side Brushes
*
A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
Main Brush
Turn the robot over. Push both buttons under the Main Brush towards the center of the robot.
Remove the main brush cover.
Remove the Main Brush.
Use the Multi-Function Cleaning Tool to cut off and remove any hair tangled around the Main Brush.
Side Brushes
Remove the Side Brushes. Wipe the Side
Brushes and their slots with a dry cloth.
Pull out the plastic nut on the end of the Main Brush. Remove the plastic caps on both ends. Clean
any tangled hair or debris from both ends of the Main Brush and inside the plastic caps.
To Next Page
Loading...
