Defibtech DDU-100 - 7 Event Viewing; Defibtech Data Cards

45
DAC-510E-EN-BF
7 Event Viewing
DefibView is a Windows based software application that reads data stored on a DDC and displays
it on a personal computer. DefibView serves four primary functions:
• EnablesemergencycarepersonneltoreconstructacardiacepisodefromthetimetheAED
was turned on and connected to the patient until the unit is turned off.
• Enablesapatient’sprimarycaregivertoreviewtheemergencyepisode.
• AllowsDebtechandregulatorypersonneltoreconstructacardiacepisodeforreviewof
device performance.
• Providesmaintenancepersonnelwithadditionalparameterinformationtoassistin
troubleshooting a device suspected of malfunctioning.
DefibView is a stand-alone software application. It cannot be used with the AED in operation and
exists solely to support post-event review of the data recorded on a DDC or downloaded to a DDC
from internal storage. The DDC from an event should be transported to a medical facility with the
patient, allowing medical professionals to review the data.
For details about the features and use of the application, refer to the DefibView documentation.
7.1 Defibtech Data Cards
If a DDC is installed in the unit, every time the DDU-100 is turned on the following information is
recorded on a new file on the card:
• ThetimetheAEDwasturnedon.
• Otherdatasuchas:ECGdata,timedata,audiodata(audioenabledcardsonly).
• Eventmilestonessuchas:motiondetection,shockadvice,shockdeliveryinformation.
This information can be reviewed using the DefibView application.