EasyManuals Logo

Defy DHD406A User Manual

Defy DHD406A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Page 16 of 24
1. Turn on the hob.
2. Touch one of the cooking zone selection
controls to turn on the desired cooking
zone. After selecting the cooking zone of
the hob, " " decimal point will flash on
the relevant cooking zone display.
If no operation is performed within 10
seconds, the hob will automatically return
to Standby mode.
3. Touch " " or " " keys to set the
temperature level to a value between "1"
and "9" or between "9" and "1".
" " and " " keys are equipped with repeat
function. If you touch any of these keys for a
long time, temperature level will continuously
increase or decrease at every 0,4 seconds.
If you start with " " key, "1" appears on
display. If you start with " " key, set value
appears on display (e.g., half second ''A"
and half second "9") . This indicates that
Booster is activated.
When your hob gets overheated;
If the active cooking zones are set to a
higher than the 7th level, hob reduces
the level of active cooking zones to
level 7 and the cooking zones can not
be selected higher than this level.
If overheating persists; if the active
cooking zones are set to a higher than
the 5th level, hob reduces the level of
active cooking zones to level 5 and the
cooking zones can not be selected
higher than this level.
If hob temperature rises excessively, it can
turn itself off for protection and the cooking
zones can not be operated.
Booster
This function facilitates cooking. When
Booster is activated, the cooking will operate
at maximum power for a certain period of
time (see, Table-1). Booster time depends
on the selected temperature level. This is
indicated with an "A" and the set
temperature value which flash alternately on
cooking zone display (e.g., half second "A",
half second "9") Once the Booster time is
over, power of cooking zone will be reduced
and the temperature value will be displayed
continuously.
All cooking zones are equipped with Booster
function.
Enabling the Booster function:
1. Turn on the hob.
2. Select the desired cooking zone by
touching the cooking zone selection keys.
3. Use " " key to set the cooking zone
temperature value to "9". Once the
temperature setting is made, "9" and "A"
will appear on the display alternately. This
indicates that temperature value is set to
"9" and Booster function is activated.
If your hob gets overheated,
booster function cannot be set for
protection.
4. Then, use " " key within 10 seconds to
select the temperature setting you want to
be activated for the remainder of cooking
process after the Booster time is over.
Use " " or" " keys to set the cooking
zone to a value between "1" or "9" (it is
supposed that level 6 is selected for the
example).
5. "A" and "6" appears alternately on the
display during Booster function (at the end
of Booster period, "6" will be displayed
continuously).
Selecting the cooking zones

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Defy DHD406A and is the answer not in the manual?

Defy DHD406A Specifications

General IconGeneral
Hob typeCeramic
Product colorBlack
Hob width size- cm
Top surface typeGlass-ceramic
Appliance placementBuilt-in
Cooking zone 1 typeLarge
Cooking zone 2 typeMedium
Cooking zone 1 power1800 W
Cooking zone 1 shapeRound
Cooking zone 2 power1200 W
Cooking zone 1 diameter180 mm
Cooking zone 1 positionLeft front
Cooking zone 2 diameter140 mm
Cooking zone 2 positionRight rear
Cooking zone 4 positionRight front
Number of cooking zones4 zone(s)
Cooking zone 1 power sourceElectric
Number of gas cooking zones0 zone(s)
Built-in hoodNo
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Connected load (gas)- W
Connected load (electric)6000 W
Control typeTouch
Display typeLED
Built-in displayYes
Control positionTop front
Weight and Dimensions IconWeight and Dimensions
Depth510 mm
Width650 mm
Height55 mm
Installation compartment width560 mm
Installation compartment depth (min)490 mm

Related product manuals