1. Introduction
1.1 About the installation instructions
1.1.1 General purpose
These are the Installation instructions for DEIF's Advanced Genset Controller, AGC 150. The Installation instructions provide
information for the correct installation of the controller, with primary focus on the physical installation of the equipment.
DANGER!
Read these instructions before installation of the AGC 150 controller, to avoid personal injury and damage to the
equipment.
1.1.2 Intended users of the Installation instructions
The Installation instructions are primarily intended for the people, who mount and wire up the controller. Designers may find it useful
to refer to the Installation instructions, when developing the system's wiring diagrams, and operators may find it useful to refer to the
Installation instructions while troubleshooting.
1.1.3 List of technical documentation for AGC 150
Document
Contents
Product sheet
• Short description
• Controller applications
• Main features and functions
• Technical data
• Protections
• Dimensions
Data sheet
• General description
• Functions and features
• Controller applications
• Controller types and variants
• Protections
• Inputs and outputs
• Technical specifications
Designer's handbook
• Principles
• General controller sequences, functions and protections
• GENSET controller
• Mains controller
• BTB controller
• Protections and alarms
• AC configuration and nominal settings
• Breaker and synchronisation
• Regulation
• Load sharing
• Hardware characteristics
• Modbus
Installation instructions
• Tools and materials
• Mounting
INSTALLATION INSTRUCTIONS UK Page 3 of 22
To Next Page
Loading...
