Materials Used for
Ethernet cable
Connecting the controller communication between controllers
and/or external systems
Cable ties Securing wiring and Ethernet cable
3.1.3 Mounting instructions
The controller is designed for mounting in the panel front. Max. panel thickness: 4.5 mm (0.18 in).
Panel cutout:
• Width: 218.5 mm (8.60 in)
• Height: 158.5 mm (6.24 in)
• Tolerance: ± 0.3 mm (0.01 in)
1. Insert the controller in the panel.
2. Insert the screw clamps:
*Click*
3.b.1 3.b.2 3.b.3 3.b.4
3. Tighten the screw clamps to 0.2 Nm.
INSTALLATION INSTRUCTIONS UK Page 8 of 22
To Next Page
Loading...
