Delem
V0614, 2.30
To simplify testing during the development of a sequencer modification the sequencer can be
loaded from a USB-stick without having to copy it to the control.
Figure 2.k
In the machine parameters the parameter ‘Sequencer from USB memory’ can be switched
on. When the sequencer is final, the softkey ‘Install Sequencer’ can be used to copy the
sequencer files seq_inp.TXT and *.DEF to the sequencer directory in the control. After
installing the new sequencer the parameter ‘Sequencer from USB memory’ can be switched
off again.
For a description of sequencer programming we refer to the Delem sequencer programming
language manual [2].
To Next Page
Loading...
