Delem DA-52s - Analog B; Digital I;O

Delem
V0614, 1.13
3.6. Analog B
Connector Analog B provides several analog signals, two analog
outputs and two analog inputs. It also includes power supply for
possible valve position transducers (LVDT).
See schematic 8061-101 for connection details.
Specifications for Analog I/O
Analogue inputs (2x)
0-12V / -10V ... +10V,
input impedance 44 kΩ
Supply voltage 24V + 2%
Analogue outputs (2x)
+/- 10V
10mA max.
maximum load 1 kΩ
Analogue output (1x)
0 - 10V (ext. pressure amplifier)
Power outputs (6x)
2x -12V
2x +12V
2x 24V
100 mA max. for each transducer
Notes:
• Used power supply depends on transducer specifications (+/-12V or 24V).
3.7. Digital I/O
12 inputs, 12 outputs, 8 programmable I/O.