Delfi DelfiScan C51 - Page 10

DelfiScan
Programming Manual
Configure Your DelfiScan
6
Single scan selection Multiple scans selection
Scan
“PROGRAM”
Scan
One of
Family
Codes
Scan
One of
Option
Codes
Repeat
Selection
Scan
“END”
No
Yes
Enter programming mode.
Select one of desired
programming families.
Select one option code of
desired parameter.
Want to select another
programming family?
Exit programming mode.
Enter programming mode.
Select one of desired
programming families.
1. Select one or several
option codes to select
desired parameters.
2. If it’s necessary, scan
“FIN” to terminate
option code selection.
Want to select another
programming family?
Exit programming mode.
Scan
“
PROGRAM”
Scan
One of Family Codes
Scan One or
Several Option Codes
Repeat
Selection
Scan
“END”
No
Yes