Figure 10 Removing a hard drive
1. Release button
2. Disk/carrier
3. Drive carrier handle
You must transfer the disk drive tray to the exact corresponding slot in the
replacement chassis that it was removed from.
3. Insert the disk drive carrier into the disk drive slot until the carrier connects
with the backplane.
4. Close the disk drive carrier handle to lock the disk drive in place.
Figure 11
Installing a disk drive
1. Disk/carrier
2. Drive carrier handle
5. Repeat steps1 - 4 to transfer all remaining disks from the faulted server to the
replacement server.
Dell PowerEdge R630 Server FRUs
DELL EMC CONFIDENTIAL
54 Integrated Data Protection Appliance (IDPA) 2.1 Field Replacement Guide
To Next Page
Loading...
