Dell EMC DP5300 - Configure the Replacement Drive; Open the Disk Drive Carrier Handle; Installing a Disk Drive

Figure 2 Open the disk drive carrier handle
1. Release button
2. Disk/carrier
3. Drive carrier handle
2. Insert the disk drive carrier into the disk drive slot until the carrier connects
with the backplane.
3. Close the disk drive carrier handle to lock the disk drive in place.
Figure 3
Installing a disk drive
1. Disk/carrier
2. Drive carrier handle
Configure the replacement drive
Complete one of the following tasks to configure the replacement drive:
l
Proceed to Configure the replacement SSD on page 39 to configure a new SSD.
l
Proceed to Configure the replacement HDD on page 39 to configure a new HDD.
Dell PowerEdge R630 Server FRUs
DELL EMC CONFIDENTIAL
38 Integrated Data Protection Appliance (IDPA) 2.1 Field Replacement Guide