Dell EMC DP5300 - Storing and Handling Components; Management Ethernet Port Leds; SFP+ Port Leds; QSFP+ Port Leds

Table 28 Management Ethernet port LEDs
LED Description
Link LED
l
Off—No Link
l
Solid green—Link on 1 Gbps speed
l
Solid yellow—Link on 10/100 Mbps
speeds
Table 29 SFP+ port LEDs
LED Description
Link LED
l
Off—No Link
l
Solid green—Link on 10 Gbps speed
l
Solid Amber—Link on 1 Gbp speed
Note
If you are using 1x40G, one LED displays. If
you are using 4x10G, four LEDs display.
Activity LED
l
Off—No Link
l
Blinking green—Transmit/receive is
active
Table 30 QSFP+ port LEDs
LED Description
Link LED
l
Off—No Link
l
Solid green—Link on 40 Gbps speed
l
Solid amber—Link on 10 Gbps speeds
Storing and handling components
It is recommended to use these guidelines if you do not install replacement
components immediately:
l
Storage location temperature must remain constant ranging from -40° to 158°F
(from -40°C to 70°C).
l
Store on a dry surface or floor, away from direct sunlight, heat, and air
conditioning ducts.
l
Store in a dust-free environment.
Dell S4048-ON Switch FRUs
DELL EMC CONFIDENTIAL
80 Integrated Data Protection Appliance (IDPA) 2.1 Field Replacement Guide