Light fatigue
Fog
Bead-Carry-Out (BCO)
the Apply New Settings button.
3. Click the Tool Box button.
4. Press the Print with A4(2) or Print with Letter (B)
button.
Check the pattern for light fatigue.
1. Click the Tool Box button.
2. Press the Print with A4(1) or Print with Letter(A)
button. "Printing" appears.
Is the pattern matched?
Yes. Do the PHD Refresh Mode.
1. Click the Tool Box button.
2. After you start the PHD Refresh Mode, click the Tool
Box button, and then press the Print with A4(3), or
Print with Letter(C) button. "Printing" appears.
Is the problem recovered?
Yes. The task is complete.
No. Replace the PHD unit. See "Replacing the PHD (Print
Head Device) Unit" and "Installing the PHD Unit".
Do the PHD Refresh Mode.
1. Click the Tool Box button.
2. After you complete the Refresh Mode, select Chart
Print from the list. Press the Print with A4 (3) or Print
with Letter (C) button. "Printing" appears.
Is the problem recovered?
Yes. The task is complete.
No. Replace the PHD unit, if possible. See "Replacing the
PHD (Print Head Device) Unit" and "Installing the PHD
Unit".
After you complete the Refresh Mode, select Chart Print
from the list. Press the Print with A4 (3) or Print with Letter
(C) button. "Printing" appears.
Is the problem recovered?
Yes. The task is complete.
No. Contact Dell.
To Next Page
Loading...
Need help?
General
