Dell 1710 - Page 10

The system board has one connector for an optional memory card. The printer can support up to 128MB (for
a total of 160MB for a network printer and 144MB for a non-network printer).
CAUTION: If you are installing a memory card after setting up the printer, turn the printer
off, and unplug the power cord before continuing.
Open the front cover by pressing the button on the left side of the printer and lowering the cover.1.
Open the rear exit.2.
Open the side cover by pressing the two detents on the front right side of the machine and swinging
the cover back.
3.