Values:
Off
On (factory default)
MAC Binary PS
Use this setting to: configure the printer to process Macintosh binary PostScript print jobs.
Values:
Off-The printer filters PostScript print jobs using standard protocol.
On-The printer processes raw binary PostScript print jobs from computers using the Macintosh
operating system. This setting often causes Windows print jobs to fail.
Auto (factory default)-The printer processes print jobs from computers using either Windows
or Macintosh operating systems.
Setup Menu
Use the Setup menu to configure how the printer formats the end of a line depending on the computer
system being used.
Auto CR after LF
Use this setting to: specify whether the printer automatically performs a carriage return after a line feed
control command.
Values:
Off (factory default)
On
Auto LF after CR
Use this setting to: specify whether the printer automatically performs a line feed after a carriage return
control command.
Values:
To Next Page
Loading...
