Back
Mode
When selected PIP
PIP Source
PIP Position
PIP Size
PIP Contrast
PIP Hue/Tint
PIP Saturation
Exit Menu
or
NOTE: W hen using DVI source, the contrast adjustment is not available.
Push to select Back to go back to the main menu.
There is one mode: PIP (Picture in Picture)
Use and to browse and to select "Off" or "PIP".
When PIP on, choose "SWAP" to switch the main-screen and sub-scree n in PIP mode.
Select an input signal for PIP. (VGA/DVI/S-Video/Composite)
Use and to browse and to select.
Select PIP window position.
Use and to browse and to select.
Select PIP window size.
Use and to browse and to select.
Adjust the contrast level of the picture in PIP Mode.
reduce the contrast
increases the contrast
This function shifts the color of PIP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP image.
makes the image look more monochrome
makes the image look more colorful
Push to exit the OSD main menu.
OSD Warning Messages
When the monitor does not support a particular resolution mode you will see the following message:
To Next Page
Loading...
