Dell 5100MP - Factory Reset Menu; Computer Source Menu

Using Your Projector 35
Factory Reset Menu
FACTORY RESET—Select Yes to reset the
projector to its factory default settings. Reset
items include both computer image and video
image settings.
Computer Source Menu
NOTE: This menu is only available connected to a computer.
FREQUENCY—Change the display data clock
frequency to match the frequency of your
computer graphics card. If you see a vertical
flickering bar, use Frequency control to
minimize the bars. This is a coarse adjustment.
T
RACKING—Synchronize the phase of the
display signal with the graphic card. If you
experience an unstable or flickering image, use
the Tracking to correct it. This is a fine
adjustment.
NOTE: Adjust the Frequency first and then the Tracking.
H
OR. POSITION—Press to adjust the horizontal position of the image to the
left and to adjust the horizontal position of the image to the right.
VER. POSITION—Press to adjust the vertical position of the image down and
to adjust the vertical position of the image up.