Dell Alienware Aurora R8 - Removing the Top-Cover Assembly; Prerequisites; Procedure

Removing the top-cover assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer. After working inside your computer, follow the instructions
in
After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the left-side cover.
2 Remove the right-side cover.
Procedure
1 Remove the two screws (#6-32 X 1/4") that secure the top cover to the chassis.
2 Disconnect the lighting cable from the top cover.
3 Slide the lighting cable through the slot on the chassis.
4 Starting from the rear, release the tabs on the top cover from the slots on the chassis.
26