Display back-cover and antenna assembly
Removing the display back-cover
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Disconnect the battery cable.
5. Remove the WLAN.
6. Remove the display assembly.
7. Remove the display bezel.
8. Remove the display panel.
9. Remove the camera.
About this task
After performing all the preceding steps, you are left with the display back-cover.
Installing the display back-cover
About this task
Place the display back-cover on a clean and flat surface.
66
Disassembly and reassembly
To Next Page
Loading...
