Next steps
1 Install the base cover.
2 Install the microSD card.
3 Follow the procedure in after working inside your computer.
Speaker
Removing the speakers
Prerequisites
1 Follow the procedure in before working inside your computer.
2 Remove the microSD card.
3 Remove the base cover.
4 Remove the battery.
Steps
1 Peel the adhesive tape that secures the speaker cable to the palmrest [1].
2 Disconnect the speaker cable from the connector on the system board [2].
3 Peel the adhesive tape that secures the speaker cable to the palmrest [3].
Removing and Installing
25