Step
The component you are left with is the display back-cover and antenna assembly after performing the pre-removal parts procedures.
NOTE: The display back-cover and antenna assembly cannot be further disassembled once all the pre-removal parts
procedures are completed. If the wireless antennas are malfunctioning and need to be replaced, replace the entire
display back-cover and antenna assembly.
Next steps
1 Install the display cable.
2 Install the camera.
3 Install the display hinges.
4 Install the display panel
5 Install the display bezel.
6 Install the display assembly.
7 Install the battery.
8 Install the base cover.
9 Install the microSD card.
10 Follow the procedure in after working inside your computer.
Removing and Installing
77
To Next Page
Loading...
