34 Basic Operation
www.dell.com | support.dell.com
2
Select
Enable Screen Saver
.
3
Type the number of minutes for
Inactivity Time (from 1 to 99)
to delay activation of the
screen saver.
4
Choose
Energy
if your monitor is E
NERGY
S
TAR
®
compliant; otherwise select
Screen
.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with
E
NERGY STAR®.
5
(Optional) Click
Test
to activate the screen saver test, which lasts 10 seconds then returns you
to the
Security
dialog box.
6
Click
OK
.
NOTE: Activation of the screen saver mode disconnects the user from a server; no server is selected.
The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The
Main
dialog box appears and any previous server
connection will be restored.
To turn off the screen saver:
1
In the
Security
dialog box, clear
Enable Screen Saver
.
2
Click
OK
.
To immediately turn on the screen saver:
Press
<Print Screen>
, then press
<Pause>
.
Displaying Version Information
The OSCAR interface enables you to display the versions of the Console Switch and the SIP
firmware. For optimum performance, keep your firmware current. For more information, see
"Appendix A: Flash Upgrades".
To display version information:
1
Press
<Print Screen>
. The
Main
dialog box appears.
2
Click
Commands - Display Versions.
The
Version
dialog box appears. The top half of the box
lists the subsystem versions in the appliance.
To Next Page
Loading...
