Table 12. Manageability(continued)
Option Description
MEBx Hotkey
Allows you to specify if the MEBx Hotkey function should be
enabled when the system boots
This option is set by default.
Virtualization support
Table 13. Virtualization Support
Option Description
Virtualization
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by the Intel Virtualization technology.
• Enable Intel Virtualization Technology
This option is set by default.
VT for Direct I/O
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by the Intel Virtualization technology for direct I/O.
• Enable VT for Direct I/O
This option is set by default.
Trusted Execution
Allows you to specify whether a Measured Virtual Machine Monitor (MVMM) can utilize the
additional hardware capabilities provided by the Intel Trusted Execution Program.
• Trusted Execution
This option is not set by default.
Maintenance
Table 14. Maintenance
Option Description
Service Tag
Displays the service tag of your computer.
Asset Tag
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
SERR Messages
Controls the SERR message mechanism. Some graphics cards require that the SERR message
mechanism be disabled.
This option is not set by default.
BIOS Downgrade
Allows you to flash previous revisions of the system firmware.
• Allow BIOS Downgrade
This option is set by default.
Data Wipe
Allows you to securely erase data from all internal storage devices.
• Wipe on Next Boot
This option is not set by default.
Bios Recovery
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the HDD or an external USB key.
112 System Setup