Dell D18M - 3.5-Inch Hard Drive Assembly; Removing 3.5-Inch Hard Drive Assembly

2. Install the
a. front bezel
b. side cover
3. Follow the procedure in After working inside your computer.
3.5-inch hard drive assembly
Removing 3.5–inch hard drive assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. To remove the hard drive assembly:
a. Disconnect the hard drive assembly cables from the connectors on the hard drive.
NOTE: Ensure to remove the SATA blue cable first, to ease in removing the hard drive data cable.
16 Disassembly and reassembly