3. Close the front panel door.
4. Install the:
a. front bezel
b. side cover
5. Follow the procedure in After working inside your computer.
Heat sink
Removing heatsink assembly
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. bezel
3. Open the front panel door.
4. To remove the heatsink assembly:
a. Disconnect the heatsink fan assembly cable from the connector on the system board [1].
b. Loosen the captive screws (4) that secure the heatsink assembly to the system board [2].
NOTE: Remove the screw in the sequential order (1,2,3,4) as printed on the system board.
c. Lift the heatsink assembly away from the computer [3].
50
Disassembly and reassembly
To Next Page
Loading...
