Dell D18M - Intrusion Switch; Removing Intrusion Switch

5. Close the front panel door.
6. Install the:
a. front bezel
b. side cover
7. Follow the procedure in After working inside your computer.
Intrusion switch
Removing intrusion switch
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. Open the front panel door.
4. To remove the intrusion switch:
a. Press the latch and disconnect the intrusion switch cable from the connector on the system board and pull the cable [1].
b. Unroute the intrusion switch cable from the fan grommet [2].
c. Slide the intrusion switch and push it to remove from the computer [3].
38
Disassembly and reassembly