5. Close the front panel door.
6. Install the:
a. front bezel
b. side cover
7. Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing M.2 PCle SSD - optional
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. Open the front panel door.
4. To remove the M.2 PCIe SSD:
a. Remove the screw that secures the M.2 PCIe SSD to the system board [1].
b. Slide out the M.2 PCIe SSD from the connector on the system board [2].
26
Disassembly and reassembly
To Next Page
Loading...
