3. Close the front panel door.
4. Install the:
a. front bezel
b. side cover
5. Follow the procedure in After working inside your computer.
Power button
Removing power button
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. Open the front panel door.
4. To release the power switch:
a. Pull the socket to disconnect the power switch cable from the system board [1].
b. Unroute the power switch cable through the retention clip [2].
c. Press the release tabs using a plastic scribe and slide the power switch out from the front of the computer [3].
d. Close the front panel door [4].
42
Disassembly and reassembly
To Next Page
Loading...
