4. Close the front panel door.
5. Install the:
a. front bezel
b. side cover
6. Follow the procedure in After working inside your computer.
Processor
Removing processor
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. Open the front panel door.
4. Remove the heat sink fan
5. Remove the heat sink.
6. To remove the processor:
a. Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
b. Lift the lever upward until the lever pops out of the processor shield [2].
c. Lift the processor out of the socket [3].
52
Disassembly and reassembly
To Next Page
Loading...
