4. Close the front panel door.
5. Install the:
a. front bezel
b. side cover
6. Follow the procedure in After working inside your computer.
Memory module
Removing memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. Open the front panel door.
4. To remove the memory module:
a. Push the memory module retention tabs on both sides of the memory module [1].
b. Pull the memory module from the memory module connector on the system board [2].
NOTE: Follow the step 4a., 4b to remove the other memory modules.
30 Disassembly and reassembly
To Next Page
Loading...
