NOTE: Bison XE3 supports 4 memory module.
4. Close thefront panel door.
5. Install the:
a. front bezel
b. side cover
6. Follow the procedure in After working inside your computer.
Expansion card
Removing PCIe expansion card - optional
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. side cover
b. front bezel
3. Open the front panel door.
4. To remove the PCIe expansion card:
a. Pull the blue release tab that secures the PCIe expansion card to the system board [1].
b. Pull the card retention latch, and lift the PCIe expansion card from the connector on the system board [2,3].
32
Disassembly and reassembly