System Information
You can use the System Information screen to view system properties such as Service Tag,
system model name, and the BIOS version.
Viewing System Information
To view the System Information screen, perform the following steps:
Procedure
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
Note: If your operating system begins to load before you press F2, wait for the system
to finish booting, and then restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click System Information.
System Information details
About this task
The System Information screen details are explained as follows:
Option
Description
System Model Name
Specifies the system model name.
System BIOS Version
Specifies the BIOS version installed on the system.
System Management Engine Version
Specifies the current version of the Management Engine firmware.
System Service Tag
Specifies the system Service Tag.
System Manufacturer
Specifies the name of the system manufacturer.
System Manufacturer Contact Information
Specifies the contact information of the system manufacturer.
System CPLD Version
Specifies the current version of the system complex programmable logic device (CPLD)
firmware.
UEFI Compliance Version
Specifies the UEFI compliance level of the system firmware.
Pre-operating system management applications
66 Dell PowerEdge R430 Owner's Manual
To Next Page
Loading...
