Figure 124. Riser 4A - FL
1. Slot 7
NOTE: The expansion-card slots are not hot-swappable.
The following table provides guidelines for installing expansion cards to ensure proper cooling and mechanical fit. The expansion
cards with the highest priority should be installed first using the slot priority indicated. All the other expansion cards should be
installed in the card priority and slot priority order.
Table 52. Configuration 0: R1B + R4B
Card type Slot priority Maximum number of cards
Inventec (VGA) 8 1
Inventec (Serial) 8 1
Inventec (FPERC 10.15) Integrated slot 2
Foxconn (FPERC 11) Integrated slot 2
Foxconn (FPERC HBA11) Integrated slot 2
Foxconn (APERC 10.15) 2, 1 1
Foxconn (APERC 11) 2, 1 1
Inventec (APERC 10.15) 2, 1 1
Foxconn (APERC HBA11) 2, 1 1
SolarFlare (NIC: 25Gb) 7, 2, 1 3
Broadcom (NIC:25Gb) 7, 2, 1 3
Intel (NIC:25Gb) 7, 2, 1 3
Qlogic -Marvell (NIC: 25Gb) 7, 2, 1 3
Emulex (HBA:FC32) 7, 2, 1 3
Qlogic (HBA:FC32) 7, 2, 1 3
Emulex (HBA:FC16) 7, 2, 1 3
QLogic (HBA:FC16) 7, 2, 1 3
Broadcom (NIC:10Gb) 7, 2, 1 3
Intel (NIC:10Gb) 7, 2, 1 3
Qlogic Marvell (NIC: 10Gb) 7, 2, 1 3
Broadcom (NIC:10Gb) 7, 2, 1 3
Installing and removing system components 119
To Next Page
Loading...
