Figure 95. Installing the APERC module
Next steps
1. Connect the cables to the APERC module.
2. Install the expansion card riser.
3. Follow the procedure listed in After working inside your system.
System memory
System memory guidelines
The PowerEdge R750 system supports DDR4 registered DIMMs (RDIMMs), Load Reduced DIMM (LRDIMMs), and Intel
Persistent Memory 200 series (BPS). System memory holds the instructions that are started by the processor.
Your system memory is organized into eight channels per processor (two memory sockets per channel),16 memory sockets per
processor and 32 memory sockets per system.
Installing and removing system components
93
To Next Page
Loading...
