Table 64. Configuration 9: R2A (continued)
Card type Slot priority Maximum number of cards
Foxconn (APERC 11) 3 1
Inventec (APERC 10.15) 3 1
Foxconn (APERC HBA 11) 3 1
Mellanox (NIC: 100Gb) 3 1
Mellanox (NIC: 25Gb) 3 1
SolarFlare (NIC: 25Gb) 3 1
Broadcom (NIC: 25Gb) 3 1
Intel (NIC: 25Gb) 3 1
Qlogic - Marvell (NIC: 25Gb) 3 1
Emulex (HBA: FC32) 3 1
Qlogic (HBA: FC32) 3 1
Emulex (HBA: FC16) 3 1
QLogic (HBA: FC16) 3 1
Broadcom (NIC: 10Gb) 3 1
Intel (NIC: 10Gb) 3 1
Qlogic - Marvell (NIC: 10Gb) 3 1
Broadcom (NIC: 1Gb) 3 1
Intel (NIC: 1Gb) 3 1
Mellanox (NIC: HDR100 VPI) 3 1
Mellanox (NIC:HDR VPI) 3 1
Mellanox (OCP: 25Gb) Intergrated slot 1
SolarFlare (OCP: 25Gb) Intergrated slot 1
Broadcom (OCP: 25Gb) Intergrated slot 1
QLogic (OCP: 25Gb) Intergrated slot 1
Intel (OCP: 25Gb) Intergrated slot 1
Broadcom (OCP: 10Gb) Intergrated slot 1
Intel (OCP: 10Gb) Intergrated slot 1
QLogic (OCP: 10Gb) Intergrated slot 1
Broadcom (OCP: 1Gb) Intergrated slot 1
Intel (OCP: 1Gb) Intergrated slot 1
Foxconn (External Adapter) 3 1
Foxconn (External Adapter) 3 1
Inventec (BOSS 1.5) Intergrated slot 1
Removing the expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
138
Installing and removing system components
To Next Page
Loading...
