Figure 9. Firmware Selector Tool
Remove old and install new drivers
About this task
MV31-W modules require the (20200804_V007) WIN10 driver. However, this driver must be installed after removing old USB
drivers that were automatically installed by WIN10 PC.
Steps
1. Before connecting the MV31-W module, open the Device Manager, click View, and select Show hidden devices.
Figure 10. Show hidden devices
2. Remove (Uninstall) all devices that start with: Cinterion PID 0x00B3.
16
Setting Up the Windows 10 Operating System
To Next Page
Loading...
