Setting Up the Windows 10 Operating
System
This chapter serves as a guide to install and use the Windows 10 IoT Enterprise 2019 operating system on the EGW-3200
hardware.
For more information on the Windows 10 operating system, see https://support.microsoft.com.
NOTE: For proper Windows boot up, please ensure the BIOS version used is 0.14.10 or above.
Topics:
• Boot up and log in
• Factory reset
• System restore and backup recovery
• Security Baseline settings
• Windows 10 IoT Enterprise LTSC basic functions
• 5G module firmware update procedure
• 4G module firmware update procedure
• BMC firmware update procedure
• Accessing and updating the BIOS
• SuperIO Function Library
• Digital Input/Output Function of the Intel PCH Controller
• Digital Input/Output Function from PCA9535 GPIO
• Hardware monitor API
• Humidity and temperature sensor setup
• Pressure sensor setup
• Accelerometer sensor setup
• Intel OOB
• COM Port and Ethernet Names for Mini PCIe Cards
• Sensor APIs
Boot up and log in
Steps
1. Connect a keyboard, mouse, and monitor to the EGW-3200.
2. Power on the system. The system boots to the Windows 10 IoT Enterprise LTSC 2019 operating system.
3. Select your regional settings and keyboard layout. If needed, select the second keyboard layout. Otherwise, skip this step.
4. Connect to an available wireless or wired network. After the internet connection is established, the Windows license key is
activated.
5. Read and Agree to the End User License Agreement.
6. Create a user account with a password.
7. After login, the system will reboot once for the settings to take effect.
2
8 Setting Up the Windows 10 Operating System
To Next Page
Loading...
