Setting Up the Ubuntu Operating System
This chapter serves as a guide to install and use the Ubuntu 20.04 LTS operating system on the EGW-3200 hardware.
For more information on the Ubuntu 20.04 LTS operating system, see https://releases.ubuntu.com/20.04/.
Topics:
• Boot up and log in
• Create bootable USB stick for factory reset
• Back up and restore Ubuntu 20.04 LTS
• Update BIOS capsule
• Update LiteBMC firmware
• Update 4G module firmware
• Update 5G module firmware
• Ubuntu 20.04 LTS basic functions
• Isolated Canbus uFM expansion module
• EMP2-X2S1 card with isolated RS-232 uFM expansion module
• EMP2-X4S2 card with isolated RS-422/485 uFM expansion module
Boot up and log in
Steps
1. Connect a keyboard, mouse, and monitor to the EGW-3200.
2. Power on the system. The system boots to the Ubuntu 20.04 LTS operating system.
3. Log in to the sysem. At initial login, the user must change the password of the default account.
NOTE: The default username/password is ubuntu/ubuntu.
Create bootable USB stick for factory reset
About this task
Perform this task for recovery of the system.
Steps
1. Install the image. Download the Ubuntu desktop image 21.10 or a newer version from the Canonical website:
https://ubuntu.com/download/desktop
2. To create a bootable USB stick on Ubuntu, perform the steps in the following tutorial:
https://ubuntu.com/tutorials/create-a-usb-stick-on-ubuntu#1-overview
To create a bootable USB stick on Windows, perform the steps in the following tutorial:
https://ubuntu.com/tutorials/create-a-usb-stick-on-windows#1-overview
3
Setting Up the Ubuntu Operating System 59
To Next Page
Loading...
