Table 8. UWP application APIs for ADXL345/HDC1010/DPS310
S.No UWP application APIs Description Supported/not
supported
1. FromIdAsync Asynchronously obtains the sensor from its identifier. Supported
2. GetCurrentReading Gets the current sensor reading.
3. GetDefault Returns the default sensor type.
4. GetDeviceSelector(Guid
interfaceId)
Gets the device selector.
Table 9. UWP application sensor events for ADXL345
S.No Event name Supported/not supported
1. Choose accelerometer Supported
2. Data Events
3. Polling
4. OrientationChanged
5. Shake Events Not supported
a, b
6. Data Events Batching
a.
The interrupts which can be enabled from the driver side are Single tap, Double tap, Activity, Inactivity, and Free fall (in
INT_ENABLE register). The detection of Shake events is not supported.
b.
Data Events Batching is not supported due to the fact that the driver does not implement it.
Table 10. UWP application sensor events for DPS310
S.No Event name Supported/not supported
1. Data Events Supported
2. Polling
Table 11. UWP application sensor events for HDC1010
S.No Event name Supported/not supported
1. Data Events Supported
2. Polling
58 Setting Up the Windows 10 Operating System
To Next Page
Loading...
