Dell EMC Edge 3200 - Display; Usb; Configure Humidity, Pressure, and Accelerometer Sensors

Figure 66. Default locale for system environment
3. Log out and log in, then use the $ locale command to confirm your language settings.
Figure 67. Confirm locale
Display
About this task
Acquire screen output from the D-SUB/DVI/DP ports.
USB
About this task
The Ubuntu OS detects USB devices from the six USB ports on the front I/O panel.
Use the dmesg | grep usb command to check USB devices status.
Configure humidity, pressure, and accelerometer sensors
About this task
Three sensors are ready under the Linux iio interface with specific Linux kernel versions.
NOTE: The humidity and pressure sensors require a kernel version 5.13.0-1011-intel or later.
NOTE: The accelerometer sensor requires a kernel version 5.13.0-1014-intel or later.
NOTE: The x.x.x-10xx-intel kernel is only for the Ubuntu-specific version released by Dell.
Setting Up the Ubuntu Operating System 69