For EMPL-G2P1 and EMPL-G202:
Get the Ethernet name from Control Panel > Network and Internet > Network Connections, based on the MAC address of
the Ethernet ports.
Sensor APIs
The sensors of the EGW-3200 use Microsoft default sensor APIs. This section serves as a programming reference of the Win32
API. For more detail, see https://docs.microsoft.com/en-us/windows/win32/api/sensorsapi/.
Table 7. Console application APIs for ADXL345/HDC1010/DPS310
S.No Console application
APIs
Description Supported/not
supported
1. GetSensorsByType Retrieves a collection containing all sensors associated
with the specified type.
Supported
2. GetData Retrieves the most recent sensor data report. Supported
3. GetAt Retrieves the sensor at the specified index in the
collection.
Supported
4. GetCategory Retrieves the identifier of the sensor category. Supported
5. GetSensorValue Retrieves a single data field value from the data report. Supported
6. GetSensorValues Retrieves a collection of data field values. Supported
7. GetCount Retrieves the count of sensors in the collection. Supported
8. GetFriendlyName Retrieves the sensor name that is intended to be seen
by the user.
Supported
9. GetState Retrieves the current operational state of the sensor. Supported
10. SetEventSink Specifies the interface through which to receive
sensor event notifications.
Supported
11. GetSensorByID Retrieves a pointer to the specified sensor. Supported
12. GetProperties Retrieves multiple sensor properties. Supported
13. GetProperty Retrieves a property value. Supported
14. GetSupportedDataFields Retrieves a set of PROPERTYKEYs that represent the
data fields the sensor can provide.
Supported
15. SetProperties Specifies sensor properties. Supported
16. Add Adds a sensor to the collection. Supported
17. GetTimestamp Retrieves the time at which the data report was
created.
Supported
18. OnDataUpdated Provides sensor event data. Supported
19. OnEvent Provides custom event notifications. Supported
20. OnLeave Provides notification that a sensor device is no longer
connected.
Supported
21. OnStateChanged Provides a notification that a sensor state has
changed.
Supported
22. GetEventInterest Retrieves the current event interest settings. Supported
23. SetEventInterest Specifies the list of sensor events to receive. Supported
24. SupportsEvent Indicates whether the sensor supports the specified
event.
Supported
Setting Up the Windows 10 Operating System 57
To Next Page
Loading...
