Figure 11. Uninstall Cinterion devices
3. Open the driver package folder (SDX55_Thales_USB_x64_20220208_V023_WHQL_INF_Injection) and run
install_Thales.cmd as administrator.
Figure 12. Run driver command
Update 5G firmware in Windows
About this task
After all the required drivers have been updated, use the Firmware Selector Tool provided by Thales DIS AIS to update the
firmware.
Steps
1. Go to Utilities > Firmware, and select the Firmware Selector Tool.
Setting Up the Windows 10 Operating System
17
To Next Page
Loading...
