Figure 51. Device connection
6. Keep a copy of the following data. Use these data to create credentials for the target device to connect to the portal
over the MQTT protocol. Intel provides a sample script that gives the credentials by invoking the Azure IoT Hub Device
Provisioning Service (DPS).
● ID scope
● Device ID
● Primary key
Create an OOB capsule binary
About this task
In this task, the user generates the OOB credentials capsule binary in the host machine.
Steps
1. Prepare the OOB credentials capsule from the host machine.
2. Get the Intel Programmable Service Engine SDK source code.
3. Download the Firmware and BIOS Utilities (FBU), which is the configuration tool for provisioning data into BIOS subregions.
The latest open-source FBU release package can be downloaded from the iotg-fbu page at the GitHub software
development platform.
Setting Up the Windows 10 Operating System
51
To Next Page
Loading...
