Figure 90. Cable routing - 4 x 3.5 drive backplane with mini PERC
1.
Drive backplane 2. Cable routing clip
3. System board 4. Backplane power cable(BP: J_BP_SIG to MB: J_BP_SIG1)
5. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1) 6. Mini PERC card
7. SAS cable(BP: J_SAS_A to MB: J_STORAGE1) 8. Cable routing clip
Figure 91. Cable routing - 8 x 2.5 drive backplane with mini PERC
1.
Drive backplane 2. Cable routing clip
3. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1) 4. Backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1)
5. Mini PERC card 6. System board
104 Installing and removing system components
To Next Page
Loading...
