7. SAS cable(BP: J_SAS_A to MP: J_STORAGE1) 8. Cable routing clip
Figure 92. Cable routing - 8 x 2.5 drive backplane with onboard SATA
1.
Drive backplane 2. Cable routing clip
3. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1) 4. Backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1)
5. System board 6. SATA cable(BP: J_SAS_A0, J_SAS_B0 to MB: SATA_A,
SATA_B)
7. Cable routing clip
Installing and removing system components 105
To Next Page
Loading...
