Figure 93. Cable routing - 4 x 3.5 drive backplane with adapter PERC
1.
Drive backplane 2. Cable routing clip
3. System board 4. Backplane power cable(BP: J_BP_SIG to MB: J_BP_SIG1)
5. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1) 6. Adapter PERC card (PERC11)
7. SAS cable(BP: J_SAS_A to PERC: A1) 8. Cable routing clip
Figure 94. Cable routing - 4 x 3.5 drive backplane and 2 x 2.5 rear drive backplane with NVMe
1.
Drive backplane 2. Cable routing clip
3. System board 4. Backplane power cable(BP: J_BP_SIG to MB: J_BP_SIG1)
106 Installing and removing system components
To Next Page
Loading...
