5. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1) 6. Rear backplane power cable(Rear BP: J_BP_BPO to
MB:J_BP_PWR_A1)
7. Rear backplane signal cable (Rear BP: J_BP_SIG0 to MB:
J_BP_SIG1)
8. Rear backplane
9. Adapter PERC card (PERC11) 10. PCIe cable
11. SAS cable(BP: J_SAS_A to PERC: A1) 12. Cable routing clip
Figure 95. Cable routing - 8 x 2.5 drive backplane with adapter PERC
1.
Drive backplane 2. Cable routing clip
3. Backplane signal cable(BP: J_BP_SIG to MB: J_BP_SIG1) 4. Backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1)
5. Adapter PERC card (PERC11) 6. System board
7. SAS cable(BP: J_SAS_A0, J_SAS_B0 to PERC: A1) 8. Cable routing clip
Installing and removing system components 107
To Next Page
Loading...
