Figure 96. Cable routing - 10 x 2.5 drive backplane with adapter PERC
1.
Backplane 2. Backplane expander
3. Backplane signal cable (BP: J_BP_SIG to MB: J_BP_SIG1) 4. Cable routing clip
5. Backplane power cable(BP: J_BP_PWR_A1 to MB: J_BP1) 6. Backplane expander power cable(BP: J_BP_PWR_A to MB:
J_BP1)
7. Adapter PERC card (PERC11) 8. SAS cable(BP: BP SAS A0, BP SAS B0 to PERC: A1)
9. Cable routing clip
Figure 97. Cable routing -10 x 2.5 drive backplane and 2 x 2.5 rear drive backplane with onboard SATA
1.
Backplane 2. Backplane expander
108 Installing and removing system components